| Relay function (maximum
10 stations) |
You can make a relay with a maximum of 10 stations using the route
command.
Example of transmitting data (ABCDE) to the target station with
Equipment ID EI=04 via relay station 1 (EI=02) and relay station 2 (EI=03).
|
| Checking the field
strength of target stations |
You can check the field strength (S) and floor noise level (N) of
target stations from the source station with commands.
At a golf course, you can communicate information concerning carts,
sprinklers, lightening alerts and so on using the relay function.
You can check the field strength of target stations located at
each hole with commands from the source station.
With the CR command, you can acquire the field strength (S) and
floor noise level (N) of specified target stations.
|
| Checking communication
stability |
By repeatedly executing the packet communication test command from
the source station, you can measure the packet success rate.
 |
| |
