|
TB-CDP02-TX Transmitter
board
All ratings at 25°C +/- 5°C unless
otherwise noted |
|
Parameter
|
Rating
|
Conditions |
|
General characteristics
|
| Applicable standard |
EN 300 220 –3 Ver.1.1.1 |
|
| Operating frequency range |
433.1875 – 434.7750 MHz |
|
| Operating temperature
range |
-20
to + 60°C |
No dew
condensation |
| Storage temperature range |
-30 to + 70°C |
No dew
condensation |
| Dimensions |
70 x
80 x 13 mm |
Excluding protrusions |
| Weight |
60 g |
Including CDP-02,
without antenna |
|
Electrical specification |
| Number of RF channels |
128
ch (12.5 kHz step) |
Default
channel at delivery
(434.775 MHz) |
| Data rate |
4800
bps |
|
| Antenna impedance |
50
ohm |
Nominal |
| Operating voltage |
5 –
15 V DC |
|
| Consumption
current |
Typ.
66 mA |
Transmitter on,
all inputs off @ 15 V |
| Typ.
22 mA |
transmitter off,
all inputs off @ 15 V |
| Typ.
2.2 mA |
Driving
current for each
channel @ 5V +V Led |
| Input |
8
opto coupler |
|
| Input opto-coupler |
4-15
V DC |
Difference
between
+V Led and V Input
For higher voltages
use external resistors. |
| Opto coupler LED current |
1.5 –
8mA |
Specifications are subject to change by Reimesch without prior
notice. You are recommended to check for updated specifications on the
Reimesch web-site. The transmitter board is delivered with the radio module
mounted.
For specific information about the radio modules please refer to the CDP-02F-R
operation guide.
|
TB-CDP02-RX Receiver board
All ratings at 25°C +/- 5°C unless
otherwise noted |
|
Parameter
|
Rating
|
Conditions |
|
General characteristics
|
| Applicable standard |
EN 300 220 –3 Ver.1.1.1 |
|
| Operating frequency range |
433.1875 – 434.7750 MHz |
|
| Operating temperature
range |
-20
to + 60°C |
No dew
condensation |
| Storage temperature range |
-30 to + 70°C |
No dew
condensation |
| Dimensions |
100 x 80 x 13 mm |
Excluding protrusions |
| Weight |
90 g |
Including CDP-02,
without antenna |
|
Electrical specification |
| Number of RF channels |
128 ch (12.5 kHz step) |
Default channel at
delivery
(434.775 MHz) |
| Data rate |
4800
bps |
|
| Antenna impedance |
50
ohm |
Nominal |
| Operating voltage |
5 – 15 V |
|
| Consumption
current |
Typ. 46 mA |
No active channel @ 15 V |
| Typ. 6.5mA per relay |
When relay is switched
on @ 15 V |
| Output |
8 photo MOS
relay outputs |
|
| Output relay |
Max 48 V, 300 mA |
|
Specifications are subject to change by Reimesch without prior
notice. You are recommended to check for updated specifications on the
Reimesch website. The receiver board is delivered with the radio module
mounted. For specific information about the radio modules please refer to the
CDP-02F-R operation guide.
