1. HOME
  2. Products
  3. Transmitter/Receiver
  4. CDP-TX/RX-02F-R , CDP-TX/RX-02FP-R
  5. Development tools
  6. Specification

Wireless module product information, such as a wireless modem - CIRCUIT DESIGN,INC.

Specification

TB-CDP02-TX Transmitter board
All ratings at 25°C +/- 5°C unless otherwise noted

General characteristics
Parameter Rating Conditions
Applicable standard EN 300 220 –3 Ver.1.1.1  
Operating frequency range 433.1875 – 434.7750 MHz  
Operating temperature range -20 to + 60°C No dew condensation
Storage temperature range -30 to + 70°C No dew condensation
Dimensions 70 x 80 x 13 mm Excluding protrusions
Weight 60 g Including CDP-02, without antenna
Electrical specification
Parameter Rating Conditions
Number of RF channels 128 ch (12.5 kHz step) Default channel at delivery (434.775 MHz)
Data rate 4800 bps  
Antenna impedance 50 ohm Nominal
Operating voltage 5 – 15 V DC  
Consumption current Typ. 66 m Transmitter on, all inputs off @ 15 V
Typ. 22 mA transmitter off, all inputs off @ 15 V
Typ. 2.2 mA Driving current for each channel @ 5V +V Led
Input 8 opto coupler  
Input opto-coupler 4-15 V DC Difference between
+V Led and V Input
For higher voltages
use external resistors.
Opto coupler LED current 1.5 – 8mA

Specifications are subject to change by Reimesch without prior notice. You are recommended to check for updated specifications on the Reimesch web-site. The transmitter board is delivered with the radio module mounted. For specific information about the radio modules please refer to the CDP-02F-R operation guide.

TB-CDP02-RX Receiver board
All ratings at 25°C +/- 5°C unless otherwise noted

General characteristics
Parameter Rating Conditions
Applicable standard EN 300 220 –3 Ver.1.1.1  
Operating frequency range 433.1875 – 434.7750 MHz  
Operating temperature range -20 to + 60°C No dew condensation
Storage temperature range -30 to + 70°C No dew condensation
Dimensions 100 x 80 x 13 mm Excluding protrusions
Weight 90 g Including CDP-02, without antenna
Electrical specification
Parameter Rating Conditions
Number of RF channels 128 ch (12.5 kHz step) Default channel at delivery (434.775 MHz)
Data rate 4800 bps  
Antenna impedance 50 ohm Nominal
Operating voltage 5 – 15 V  
Consumption current Typ. 66 m No active channel @ 15 V
Typ. 22 mA When relay is switched on @ 15 V
Output Typ. 6.5mA per relay  
Output relay 4-15 V DC  

Specifications are subject to change by Reimesch without prior notice. You are recommended to check for updated specifications on the Reimesch website. The receiver board is delivered with the radio module mounted. For specific information about the radio modules please refer to the CDP-02F-R operation guide.

Back to top of the page